Do you know the common sense of automated assembly lines? Automobile automation production line manufacturers take you to know about it! After long-term operation of the automated assembly line, it will definitely cause certain losses to its conveying accessories. It is necessary for us to carry out coherent maintenance on the conveying equipment to reach the standard of coherent quality, so as to bring better economic benefits to the production enterprises. When patching automatic assembly line fittings truss, the transportation belt must be removed, and the truss should be placed on a flat surface. Reinforce the supplemented section steel, and strive to be of the same type. The welding must be firm, and it should be straightened and leveled after repair. Truss shall not have cracks and deformation, and truss shall not have extraordinary vibration and displacement during equipment operation.

If the interface of belt clip is cracked, the old belt at both ends of the interface can be cut by 150-200 mm respectively, and a new belt can be replaced according to the necessary length. When the wear of the belt exceeds 40% to 50% of its thickness or the rubber layer of the belt falls off in tension, it should be replaced. For small belt joints, round crochet or sheet crochet is used for belt joint, and belt clips are selected according to belt size. When installing the device, ensure that the clip is perpendicular to the middle line of the belt. The end of the belt buckle is not allowed to exceed the edge of the belt, and it is advisable to distance it from the edge by five to eight millimeters. The roller shall not be used as the bottom pad for leveling.

According to mechanization degree: manual assembly line, mechanized assembly line and active line. According to the rotation style of products: variable pipeline, group pipeline and mixed pipeline. Variable assembly line: focus on producing several objects fixed on the assembly line in turn. When the batch manufacturing obligation of a finished product is completed, adjust the equipment and process equipment responsively, and then start the production of another finished product.

Group assembly line: Several finished products fixed on the assembly line are not produced in batches in turn, but are produced simultaneously or sequentially within a certain time. It is basically unnecessary to readjust equipment and process equipment when changing varieties. Mixed production line: it is to plan the activities of producing multiple varieties simultaneously on the production line, and uniformly mixing and transporting all varieties, and to organize the inter-phase production. As usual, it is often used for production in plant stage.

Number of production objects: single product line and multi-product line. Single-product assembly line: also known as constant assembly line, it means that only one finished product is fixed on the assembly line. The quantity of finished products is required to be large enough to ensure that the equipment on the assembly line has sufficient load. Multi-product assembly line: more than two kinds of finished products with similar structure and process are organized into one assembly line for production. According to continuation degree: continuation pipeline and intermittent pipeline.